المجلة الدولية للعلوم والتقنية

International Science and Technology Journal

ISSN: 2519-9854 (Online)

ISSN: 2519-9846 (Print)

DOI: www.doi.org/10.62341/ISTJ

مجلة علمية محكّمة تهتم بنشر البحوث والدراسات في مجال العلوم التطبيقية، تصدر دورياً تحت إشراف نخبة من الأساتذة

تأثير الألياف الزجاجية على الكمرات الخرسانية المسلحة

الملخص
تتكون الخرسانة المسلحة من مادتين اساسيتين هما الخرسانة والمعدة لمقاومة الضغط وحديد التسليح المعد لمقاومة الشد , فمن مزايا الخرسانة مقاومتها للانضغاط العالية وقليلة الحاجة للصيانة واقتصادية إذ يتم الاستفادة من المواد المحلية في انتاجها ومقاومتها للحريق والماء جيده , إلا ان من عيوبها مقاومتها للشد واطئة وهي احد الخواص المهمة في الخرسانة المسلحة الدى جعلت العلماء البحث في تحسينها , لذي كثرت الابحاث في استخدام الاضافات كعامل مساعد في تحسين خواص الخرسانة المسلحة , الملدنات الفائقة أحد هذه الاضافات التي استعملت في الدراسة والتأثير الرئيسي له تحسين خاصية توزيع الإسمنت أو نشره . الألياف والذي تتميز بمعامل مرونة عالي ومقاومة عالية مثل الألياف المعدنية والزجاجية والكربونية وألياف الحرير الصخري, تعتبر متميزة في استخدامها في مجالات الإنشاء ولها خواص مميزة مع الخرسانة حيث أنها تنتج مركبات قوية تزيد من صلابة ومقاومة الخرسانة عند إضافتها لها كما أنها تعزز الخواص الديناميكية لها. ومن هنا كان برنامج البحث , دراسة إمكانية الاستفادة من مادة الألياف الزجاجية في زيادة مقاومة الكمرات الخرسانية المسلحة لقوى القص وعزوم الانحناء، ودور الألياف في التنبيه بحدوث الانهيار.
Abstract
Concrete is by far one of the most important building materials and its consumption is increasing in all countries and regions around the globe. The reasons are many such as: its components are available everywhere and relatively inexpensive, its production may be relatively simple, and its application covers large variety of building and civil infrastructure works .In addition, it has the lowest cost to strength ratio compared to other available materials. One of the characteristics of the plain concrete is low tensile strength, and low tensile strain capacities; that is concrete is brittle material. Thus concrete require reinforcement before it can be used extensively as construction material. Historically this reinforcement has been in the form of continuous reinforcing bars which could be placed in the structure at the appropriate locations to withstand the imposed tensile and shear stresses. Fibers, on the other hand, are generally, short discontinuous, and are randomly distributed throughout the concrete to produce a new construction material, known as Fiber Reinforced Concrete (FRC).Fibers used in cement-based materials are primarily made of steel, glass, and polymer or derived from natural materials. Since fibers to be more closely spaced than conventional reinforcing bars, they are better at controlling cracking. It is important to recognize that, In general, fiber reinforcement is not a substitute for conventional reinforcement. Fibers and steel bars has different roles to play in modern concrete technology, and there are many applications in which both fibers and continuous reinforcing bars should be used.