المجلة الدولية للعلوم والتقنية

International Science and Technology Journal

ISSN: 2519-9854 (Online)

ISSN: 2519-9846 (Print)

DOI: www.doi.org/10.62341/ISTJ

مجلة علمية محكّمة تهتم بنشر البحوث والدراسات في مجال العلوم التطبيقية، تصدر دورياً تحت إشراف نخبة من الأساتذة

Design of Central (HVAC) System for an Auditorium Building

الملخص
تهدف هذه الدراسة إلى حساب حمل التبريد واكتساب الحرارة في مساحة القاعة في أوروبا. يعد نظام تهوية التدفئة وتكييف الهواء (HVAC) أكثر التركيبات تعقيدًا في مبنى Auditorium. يشمل التصميم أنواعًا مختلفة من الأشخاص باختلاف الأعمار ، لأنه مهم لتوزيع الهواء لتوفير الراحة الحرارية للناس ، يتم تثبيت الناشرات أسفل المقاعد ومخرج الهواء في السقف. يتم تقدير الحمل الحراري من خلال العمليات الحسابية ، كما يتم دراسة حساب فقد الحرارة لكل مساحة فردية في القاعة. تم إجراء التصميم المسبق لتقدير نظام تدفئة القاعة للحد الأقصى من فقدان الحرارة المحتمل للتسخين. تم تركيب عوازل عالية الجودة في الجدران والسقف لتوفير الطاقة والصوت. ووجدت نتائج البحث أن إجمالي حمل التبريد هو 24000 [ث] ، وفقدان الحرارة 57593 [ث] ومعدل تدفق الحجم 1242 [م 3]. نجح النظام في الحفاظ على درجة الحرارة المطلوبة وهي 22 [℃] ، أحمال حرارة معقولة: و 4400 [ث].
Abstract
The aims of this study are to calculate the cooling load and heat gain on the Auditorium space in Europe. The heating ventilation and air condition (HVAC) system is the most complex install in the Auditorium building. The design includes different kinds of people with different ages, because it is important for air distribution for thermal comfort for people, the diffusers are installed under the seats and outlet air is in the ceiling. Heat load is estimated by arithmetic operation also the heat loss calculation of each individual space in the Auditorium is studied. The prior design of the of the Auditorium heating system estimate was made of the maximum probable heat loss to be heated. High quality insulations were installed in walls and roof, for saving energy and sound. The results of the research found the total cooling load is 24000 [w], heat loos is 57593 [w] and volume flow rate 1242 [m3]. The system succeeded in maintaining required temperature, which is 22 [℃], sensible heat loads: and 4400 [w].